Satcon

Design, Engineering, Survey, Soil Tests, Testing & Commissioning of EHV Substations & Overhead Lines
Opening at 9:30 AM
Header image for the site

Updates

We are glad to announce that as per Govt of India advisory, Satcon has started to operate from office from 01 May with reduced strength. We are following all precautions against Covid 19, such as reorienting seats to create physical distance of minimum 2m, sanitization, hand wash etc. We are happ...

Read More
Learn more

Satcon is participating in many design works for 220kV, 132kV, 110kV Transmission line towers in India and abroad. All the services required for the design, ie, survey, geotechnical, soil resistivity, sag and tension calculations by PLS CADD, Tower spotting, Tower schedule, Route layout plan and ...

Read More
Call now

We provide complete detail engineering and consultancy services for Electrical and Instrumentation systems of Flue Gas Desulphurisation (FGD) systems of 3 x 600MW thermal power plants. Detail engineering includes preparation of all technical specifications, Procurement and Construction drawings, ...

Read More
Call now

Satcon participated in witnessing of Factory Acceptance Tests of 145kV Semi Pantograph Isolator at the premises of M/s G. K. Electricals, Bhopal, India. The isolators will be supplied to a Substation project of TCN, Nigeria.

Call now

Satcon begins a new Detail Engineering work for 220/20kV Substation and 20kV Overhead line in Afghanistan : Satcon is proud to announce that M/s Masterlogist Construction Group (MCG), Herat, Afghanistan has gracefully awarded Satcon the Consultancy work for detail engineering of 220/20kV Substati...

Read More
Call now

Inspection of 110/15kV Mobile Substn at Ningbo Tianan

28-Oct-2019 – 30-Oct-2019

Inspection and discussion on review of Drawings for 110/15kV Mobile SS was carried out at Ningbo Tianan factory in China. The Mobile SS is going to be installed in Central African Republic.

Learn more

Inspection of Glass Insulators at Nanjing Elecric, China

Oct 30, 2019 – Oct 31, 2019

4500 piece of Glass Disc Insulators were put under testing as per IEC 60383, part-1 at the Factory of Nanjing Electric Group Company Ltd., Nanjing, China. These disc insulators will be used at the 110kV transmission line in Central African Republic.

Learn more

Starting a new project of contour survey, geotechnical investigation, detail design and engineering for 7 nos. New 132/33kV grid substations in Jharkhand funded by the World bank. We thank M/s Flowmore ltd. for entrusting the job with us.
(Photo taken during DGPS survey of one of the plots).

Call now

We have been engaged by M/s Ahmin Technology Power Systems ltd., Nigeria to provide Prebid Engineering services for NTP TR1 package of TCN PMU, Nigeria. The project consists of renovation of 8 nos. 330/132/33kV and 132/33kV existing substations of TCN in North East of Nigeria. We thank Ahmin for ...

Read More
Call now

Services

Design, Engg & Consultancy services for EHV (upto 400kV) Outdoor/GIS substn projects, Transmission Line & Indust. Power Distribution Systems

  • Contour Survey of Substation plot

    ₹50,000.00
    We have done topographical contour survey of more than 25 substations in India. The survey can be done either by Total station or by Digital GPS device. 10 - 15 acres of land can be surveyed in one day if the field is clear and fit for survey.
  • Geotechnical Investigation of Substation plot

    ₹250,000.00
    Geotechnical investigation comprising of Soil bearing tests, Soil resistivity tests and California Bearing Ratio test are carried out to ascertain the soil condition and apply these test measurements in civil and electrical (earthing) calculations. We have done such tests and measurements in more than 25 substations in India. Geotechnical tests for 10-15 acres of land can be carried out in 3-4 days and then report can be submitted in another two weeks.
  • Detail Engineering Drawings for Electrical, Civil & Structural works

    Based on the requirement of the Project Technical specifications and ordered BOQ, we prepare detail engineering drawings for Electrical, Civil & Structural works of the Substation
  • Electrical Design calculations by MS Excel/software

    ₹300,000.00
    1) Earthing calculation as per IS 3043, IEEE 80, 2) Lightning protection calculations as per IS 2309, IEC 62305, 3) Short circuit force calculation of ACSR/AAC conductors as per IEC 60865, 4) Sag & Tension calculation, 5) Short circuit force calculation of AL Rigid tubular bus conductor as per IEC 60865, 6) ACSR/AAC conductor sizing calculation, 7) AL Tubular bus sizing calculation, 8) Illumination calculations for Indoor and Outdoor areas, 9) CT Knee point value calculations, 10) Insulation coordination studies, 11) Battery sizing calculation, 12) Battery charger sizing calculation, 13) AC & DC Breaker sizing calculation, 14) Transformer sizing calculation, 15) Relay setting calculations and Coordination charts.
  • Civil & Structural Design Calculations by Staad pro for :

    ₹200,000.00
    1) Lattice & pipe type steel structures for Switchyard equipment supports and gantry tower/beams, 2) Foundations of various Switchyard equipment, 3) Foundation and Oil pit design of Auto Transformers, Power Transformers and Shunt Reactors, 4) Outdoor and Indoor cable trenches, 5) Land cutting and filling calculations, 6) Surface drainage system and Sump pits design, 7) Fire water reservoir and Fire fighting pump house design, 8) Road and pavements design, 9) Control building (Single or Multistoried) design calculations consisting of foundation, column, plinth beam, lintel beam, floor slabs, roof slab designs, 10) Staff quarters / Dormitory civil designs, 11) Boundary wall, compound wall design, 12) Retaining wall design.
  • Electrical System Study by ETAP 19.0.1c software

    ₹500,000.00
    1) Load flow study, 2) Short circuit study, 3) Earth fault study, 4) Motor starting study, 5) Protection coordination study, 6) Equipment sizing calculations for fairly large electrical networks.
  • CAD drawings of Substations & Transmission lines

    ₹200,000.00
    1) Single Line diagrams, 2) Control & Protection schematics, 3) Protection and metering single line diagrams, 4) Layout plan & elevation drawings, 5) Indoor & Outdoor Cable trench layout drawings and BOQ, 6) Earthing and Lightning protection layout drawings and BOQ, 7) Lighting layout drawings with BOQ, 8) CT/PT/CVT/BMK terminal plan drawings, 9) SCADA & PLCC system block architecture diagrams, 10) Power and control cable schedule and Interconnection diagrams, 12) Power and control cable estimates, 13) Erection key diagram plan & elevation diagrams, 14) BOQ of erection hardware, clamps, connectors, ACSR/AAC conductors, AL tubular bus conductor, disc & post insulators, 15) Structural GA drawings and BOQ for Switchyard equipment supports and gantry tower/beams, 16) Structural GA drawings and BOQ for Transmission towers, 17) Civil GA drawings for foundations of Switchyard equipment foundations, cable trenches, surface drains, Transformer foundation & oil pits, Oil water separator pit.
  • Preparation of Technical Specifications of Extra High Voltage Equipment

    ₹300,000.00
    1) Circuit breakers, 2) Isolators, 3) Current transformers, 4) Capacitive voltage transformers, 5) Potential transformers, 6) Lightning arresters, 7) Post & Disc insulators, 8) Auto, Power & Distribution transformers, 9) Earthing transformers, earthing reactors, 10) Control & Relay panels, 11) SCADA systems, 12) Power line carrier communication system, 13) Fibre optic communication system, 14) Earthing & Lightning protection materials, 15) Low voltage AC & DC DBs, 16) Power and control cables, cable glands & lugs, 17) Civil & structural works specifications, 18) Erection, testing and commissioning system works, 19) Fire fighting system, 20) Air conditioning & Ventilation system, 21) Nitrogen injection fire protection system.
  • Bid Evaluations and Recommendation Reports for EHV Switchyard Equipment

    ₹200,000.00
    Evaluation of offers of the following equipment : 1) Circuit breakers, 2) Isolators, 3) Current transformers, 4) Capacitive voltage transformers, 5) Potential transformers, 6) Lightning arresters, 7) Post & Disc insulators, 8) Auto, Power & Distribution transformers, 9) Earthing transformers, earthing reactors, 10) Control & Relay panels, 11) SCADA systems, 12) Power line carrier communication system, 13) Fibre optic communication system, 14) Earthing & Lightning protection materials, 15) Low voltage AC & DC DBs, 16) Power and control cables, cable glands & lugs, 17) Civil & structural works, 18) Erection, testing and commissioning system works, 19) Fire fighting system, 20) Air conditioning & Ventilation system, 21) Nitrogen injection fire protection system.
  • Vendor drawing review and approval of EHV Equipment

    ₹300,000.00
    Vendor drawing review and approval for : 1) Circuit breakers, 2) Isolators, 3) Current transformers, 4) Capacitive voltage transformers, 5) Potential transformers, 6) Lightning arresters, 7) Post & Disc insulators, 8) Auto, Power & Distribution transformers, 9) Earthing transformers, earthing reactors, 10) Control & Relay panels, 11) SCADA systems, 12) Power line carrier communication system, 13) Fibre optic communication system, 14) Earthing & Lightning protection materials, 15) Low voltage AC & DC DBs, 16) Power and control cables, cable glands & lugs, 17) Civil & structural works, 18) Erection, testing and commissioning system works, 19) Fire fighting system, 20) Air conditioning & Ventilation system, 21) Nitrogen injection fire protection system.
  • Feasibility Reports, Project Reports

    ₹250,000.00
    Our team of senior engineers can execute field surveys, data collection, preparation of Feasibility reports and Project reports for EHV Substation projects and Transmission line projects in India and other countries. Both technical and financial feasibility are covered in these Reports.
  • Supervision of Erection, Testing & Commissioning

    ₹100,000.00
    We depute senior engineer at site assisted by junior engineer/s (if required) for supervision of Erection, Testing & Commissioning of the substation. The accommodation and transportation of the senior engineer may please be provided by the Customer.
  • Witnessing of Factory Acceptance Tests

    Witnessing of Factory Acceptance Tests can be done for these equipment : 1) Circuit breakers, 2) Isolators, 3) Current transformers, 4) Capacitive voltage transformers, 5) Potential transformers, 6) Lightning arresters, 7) Post & Disc insulators, 8) Auto, Power & Distribution transformers, 9) Earthing transformers, earthing reactors, 10) Control & Relay panels, 11) SCADA systems, 12) Power line carrier communication system, 13) Fibre optic communication system, 14) Earthing & Lightning protection materials, 15) Low voltage AC & DC DBs, 16) Power and control cables, cable glands & lugs, 17) Steel structural works, 18) Fire fighting system, 19) Air conditioning & Ventilation system, 20) Nitrogen injection fire protection system.

Testimonials

3 years ago
Engineers work with dedication and donot make compromise on quality.
- Satyaki M
2 years ago
Good
- Bulbul S
5 months ago
(Translated by Google) very good (Original) बहुत अच्छा
- sitaram c

About Us

Satcon is an ISO 9001-2015 certified Design, Engineering and Consultancy firm for Large EHV Substations and Transmission lines (upto 400kV), EBOP of Thermal & Solar power plants, Power distribution system of various type of Industries (steel plants, material handling plants etc.). Our services include Design & Engineering of Electrical, Civil, Structural, Controls, Protections and Substation Automation systems of the above mentioned type of projects. Satcon was established in year 2004 and since then has participated in many projects in India, Africa, Middle East and other Asian countries. Other than Detail design services, Satcon also provides Topographical contour survey, Geotechnical investigation, Pre-commissioning tests and Commissioning services of Substation and Overhead line projects. Satcon has necessary softwares like ETAP, Staad pro, PLS CADD, AutoCAD & Microstation for design analysis and drafting.
At present Satcon is providing services in India, Afghanistan, Nigeria, Gabon, Sierra leone, Qatar, Oman and Bhutan.  

Contact Us

Contact

Call now
  • 098305 38398
  • 033 4062 8483
  • 098312 92354

Address

Get directions
AI-56
Street Number 29
Action Area I, Newtown
Kolkata, West Bengal 700156
India

Business Hours

Mon:9:30 AM – 6:00 PM
Tue:9:30 AM – 6:00 PM
Wed:9:30 AM – 6:00 PM
Thu:9:30 AM – 6:00 PM
Fri:9:30 AM – 6:00 PM
Sat:9:30 AM – 6:00 PM
Sun:Closed
Contact Us
Message sent. We'll get back to you soon.